SPEC-01
Specification before price
Every quotation line carries the standard, grade, size, schedule and pressure class. A line without a written specification is not priced.

We supply valves, pipe, flanges, spares and drawing-based machined parts. Every line carries its standard, grade, size and pressure class — and every shipment carries its documents.
A supplier who does not write the specification is selling you a probability. These are the checks every quotation passes before it leaves our office.
SPEC / DOC / TRACE / LEAD
SPEC-01
Every quotation line carries the standard, grade, size, schedule and pressure class. A line without a written specification is not priced.
MTC-02
We issue EN 10204 3.1 mill certificates where the specification requires them, and match the heat number to the marking and standard before dispatch.
TRACE-03
The heat number travels from the part marking to the packing list and delivery note. Marking and dimension photos stay in the order file.
LEAD-04
For stock, the dispatch date is printed on the quotation. For non-stock material, no date is confirmed before the supplier confirms it in writing.
Four families stocked and sourced regularly, plus a fifth for drawing-based machining. Each row shows a sample of the actual data, not marketing copy.
GC-VLV
Gate, ball and check valves, plus welded elbows and tees, in materials matched to the line service.
1/2" – 24" · Class 150 – 2500 · RF / RTJ / welded
GC-VLV-GT-060-150-WCB
Cast body gate valve · 6″ · 150# · RF
GC-VLV-BT-040-300-CF8M
Trunnion-mounted ball valve · 4″ · 300# · RF
GC-PIP
Seamless and welded pipe, plus heat-exchanger and boiler tubes, in stock and sourced lengths and schedules.
Seamless 1/2" – 24" · Welded 26" – 48" · SCH10 – XXS
GC-PIP-SML-060-S40-A106
Seamless pipe · 6″ · SCH40 · 6 m
GC-PIP-ERW-120-S20-A53
ERW welded pipe · 12″ · SCH20 · 12 m
GC-FLG
WN, blind, slip-on, RTJ and orifice flanges to ASME B16.5, B16.47 and EN 1092-1.
1/2" – 60" · Class 150 – 2500 · B16.5 to 24"
GC-FLG-WN-060-150-RF-A105
Weld-neck flange · 6″ · 150# · RF · SCH40
GC-FLG-BL-040-300-RF-A105
Blind flange · 4″ · 300# · RF
GC-SPR
Mechanical seals, spiral-wound gaskets, B7/2H studs, filter elements and bearings.
Seals 20 – 120 mm · Gaskets 1/2" – 24" · Studs M12 – M36
GC-SPR-MS-045-CAR
Cartridge mechanical seal · 45 mm · 16 bar
GC-SPR-GS-040-150-316L
Spiral-wound gasket · 4″ · 150# · RF
GC-MCH Parts to drawing or sample: milling, turning and spacer rings.
Custom machiningWe do not treat every sector the same. What changes is the order of priorities: documentation first in oil and gas, phased delivery in construction, downtime in manufacturing.
IND-01
Supply for process and utility lines at production and processing sites, inside fixed shutdown windows.
IND-02
Mechanical materials for commercial and industrial projects, delivered in phases to match the site programme.
IND-03
Spares and simple machining to cut line downtime, identified by sample or part number.
IND-04
Materials for heat and pressure service in power, desalination and treatment plants.
IND-05
Pipe, valves and flanges for transmission, distribution and treatment plants.

Inspection is not a photo attached to an email; it is a sequence with a record. We start at the supplier’s marking and end with a complete shipping file.
Every delivery is opened and inspected before it enters stock. Nothing is accepted on trust.
Receipt photos + heat number + accept or quarantine result.
We match the MTC to the required standard, grade and heat number — not just to the supplier name.
Certificate copy in the order file + match result + PMI result.
Dimensions are checked on a sample, and valves are pressure-tested where the specification requires it.
Dimensional report + pressure report + NDT report where applicable.

RFQ / 01
We do not need a long brief: a part number, or standard, size and quantity, is enough to start. If a line is incomplete, we ask before pricing.