Dammam · Saudi Arabia

+966 55 000 0000
Close view of an industrial metal control valve with a flanged face
CatalogueGC-CAT / 01

Five families. A written specification for every line.

This is not a wish list. Each family has its materials, ranges, standards and examples of the part numbers we supply. Anything not shown can be quoted by drawing or sample.

05 families3.1 EN 10204API 6D / ASTMDammam
GC-VLV01 / 05

Valves and fittings

Gate, ball and check valves, plus welded elbows and tees, in materials matched to the line service.

Request this family
Close view of an industrial metal control valve with a flanged face
Carbon steel
A216 WCB · A105 · A350 LF2
Stainless steel
A351 CF8M · CF3M · A182 F316L
Duplex
A995 4A · A182 F51
Alloy steel
A217 WC6 · WC9

We supply valves and fittings for process and utility lines from Class 150 to 2500. The end connection — RF, RTJ or welded — is fixed before pricing, because the wrong end means rework on site.

Sizes and classes

1/2" – 24" · Class 150 – 2500 · RF / RTJ / welded

Supply references

API 6D · API 600 · ASME B16.34 · ASME B16.9 · ASME B16.11

Typical applications

  • Process and utility lines
  • Pump stations and headers
  • Cooling and water circuits
NOTEValves are supplied with a hydrostatic test record and marking data. Additional NDT is specified in the quotation.

Sample part numbers

6 lines shown

Part numberDescriptionMaterialSizeTypical use
GC-VLV-GT-060-150-WCBCast body gate valveA216 WCB6″ · 150# · RFIsolation on process and utility water lines
GC-VLV-BT-040-300-CF8MTrunnion-mounted ball valveA351 CF8M4″ · 300# · RFGas circuits and frequently operated headers
GC-VLV-CK-080-150-CF8MDual-plate check valveA351 CF8M8″ · 150# · WaferBackflow prevention on discharge lines
GC-VLV-GL-020-800-A105Socket-weld globe valveA1052″ · 800# · SWThrottling on small-bore branches
GC-FIT-EL-060-S40-WPBLong-radius 90° elbowA234 WPB6″ · SCH40 · BWDirection changes on welded pipe runs
GC-FIT-TE-040-S80-316LEqual teeA403 WP316L4″ · SCH80S · BWStainless branch connections in process skids

The numbers above show our coding format and are not confirmed stock. Availability and lead time are confirmed in the quotation.

Scroll the table sideways to see all columns.

GC-PIP02 / 05

Pipes and tubes

Seamless and welded pipe, plus heat-exchanger and boiler tubes, in stock and sourced lengths and schedules.

Request this family
A steel roller conveyor system inside an industrial facility
Carbon steel
A106 Gr.B · A53 Gr.B
Stainless steel
A312 TP316L · TP304L
Chrome-moly
A335 P11 · P22
Heat transfer tubes
A213 TP316L · A210 Gr.A1

We cover carbon, stainless and chrome-moly pipe in 6 m and 12 m lengths. Schedule, outside diameter and wall thickness are checked before ordering, with mill certificates supplied where available.

Sizes and classes

Seamless 1/2" – 24" · Welded 26" – 48" · SCH10 – XXS

Supply references

ASTM A106 · ASTM A53 · ASTM A312 · ASTM A335 · ASME B36.10M · ASME B36.19M

Typical applications

  • Process and utility piping
  • Water and irrigation networks
  • Heat exchangers and boilers
NOTECutting and end preparation are quoted on request. Non-standard lengths are confirmed in the quotation before purchase.

Sample part numbers

6 lines shown

Part numberDescriptionMaterialSizeTypical use
GC-PIP-SML-060-S40-A106Seamless pipeA106 Gr.B6″ · SCH40 · 6 mSteam, water and air lines
GC-PIP-ERW-120-S20-A53ERW welded pipeA53 Gr.B12″ · SCH20 · 12 mUtility and irrigation networks
GC-PIP-SML-020-S10S-316LStainless pipeA312 TP316L2″ · SCH10S · 6 mChemical and process lines
GC-TUB-HX-019-316LHeat-exchanger tubeA213 TP316L19.05 × 1.65 mm · 6 mHeat-exchanger and heater retubing
GC-PIP-SML-080-S80-P11Alloy pipeA335 P118″ · SCH80 · 6 mHigh-temperature steam lines
GC-TUB-BLR-051-A210Boiler tubeA210 Gr.A12″ · 3.0 mm · 6 mBoiler and steam-generator maintenance

The numbers above show our coding format and are not confirmed stock. Availability and lead time are confirmed in the quotation.

Scroll the table sideways to see all columns.

GC-FLG03 / 05

Flanges

WN, blind, slip-on, RTJ and orifice flanges to ASME B16.5, B16.47 and EN 1092-1.

Request this family
A drilled flange face on an industrial metal valve
Carbon steel
A105N · A350 LF2
Stainless steel
A182 F316L · F304L
Duplex
A182 F51 · F53
Alloy steel
A182 F11 · F22

Flanges are often ordered by size alone, and the mismatch appears at the joint. We fix the type, facing (RF or RTJ), size, rating and bolt pattern before pricing, and match the heat number to the certificate.

Sizes and classes

1/2" – 60" · Class 150 – 2500 · B16.5 to 24"

Supply references

ASME B16.5 · ASME B16.47 · ASME B16.36 · EN 1092-1

Typical applications

  • Equipment and line connections
  • Headers and manifolds
  • Flow measurement
NOTEB16.47 flanges are available in Series A and B. State the bolt pattern and facing on the order to avoid mismatch.

Sample part numbers

6 lines shown

Part numberDescriptionMaterialSizeTypical use
GC-FLG-WN-060-150-RF-A105Weld-neck flangeA105N6″ · 150# · RF · SCH40Welded line connections at medium pressure
GC-FLG-BL-040-300-RF-A105Blind flangeA105N4″ · 300# · RFClosing line ends and headers
GC-FLG-SO-020-150-RF-316LSlip-on flangeA182 F316L2″ · 150# · RFLow-pressure stainless connections
GC-FLG-RTJ-080-900-A105Ring-type joint flangeA105N8″ · 900# · RTJGas and high-pressure lines
GC-FLG-ORF-030-600-A105Orifice flangeA105N3″ · 600# · RFFlow measurement on process lines
GC-FLG-LJ-040-150-A105Lap-joint flangeA105N4″ · 150# · RFJoints requiring frequent disassembly

The numbers above show our coding format and are not confirmed stock. Availability and lead time are confirmed in the quotation.

Scroll the table sideways to see all columns.

GC-SPR04 / 05

Spare parts

Mechanical seals, spiral-wound gaskets, B7/2H studs, filter elements and bearings.

Request this family
A warehouse aisle with metal racks, boxes and stored parts
Seal faces
SiC / SiC · Carbon / SiC · FKM
Gaskets
316L + Graphite · PTFE
Fasteners
A193 B7 · A194 2H
Bearings
GCr15 · C3 clearance

Spares are not bought from a general description. We identify the part by number, sample or drawing, then match material, dimensions and operating data. A part we cannot document is a part we do not supply.

Sizes and classes

Seals 20 – 120 mm · Gaskets 1/2" – 24" · Studs M12 – M36

Supply references

ASME B16.20 · ASTM A193 · ASTM A194 · ISO 15

Typical applications

  • Pump and compressor maintenance
  • Heat-exchanger refurbishment
  • Routine utility maintenance
NOTEParts are identified by number or sample. Without a number, we ask for a marking photo and key dimensions before quoting.

Sample part numbers

6 lines shown

Part numberDescriptionMaterialSizeTypical use
GC-SPR-MS-045-CARCartridge mechanical sealSiC/SiC · FKM45 mm · 16 barCentrifugal pumps on process duties
GC-SPR-GS-040-150-316LSpiral-wound gasket316L + Graphite4″ · 150# · RFFlange joint sealing
GC-SPR-BLT-M20-B7Stud bolt with nutA193 B7 / A194 2HM20 × 120 mmHigh-pressure flange bolting
GC-SPR-FLT-010-MICFilter element316L sintered10 micron · 2″Fuel and lube-oil filtration
GC-SPR-BRG-6312Deep-groove ball bearingGCr1560 × 130 × 31 mm · C3Pumps, fans and motors
GC-SPR-SLV-045-316Pump shaft sleeveA182 F316L45 mm · مطابق للعينةPump repair after wear

The numbers above show our coding format and are not confirmed stock. Availability and lead time are confirmed in the quotation.

Scroll the table sideways to see all columns.

GC-MCH05 / 05

Custom machining

Parts to drawing or sample: special flanges, rings, wear plates and metal brackets.

Request this family
A wide steel production hall with an overhead gantry crane
Stainless steel
316L · 304L · A182 F316L
Duplex
A182 F51 · F60
Carbon steel
S355 · A105
Wear-resistant
400 HB plate

We machine simple and mid-complexity parts that have no standard number: special flanges, spacer rings, wear plates and brackets. Work starts with a drawing and tolerance review, and a photo of the finished part is sent before dispatch.

Sizes and classes

Turning to Ø600 × 1500 mm · Milling 1200 × 600 × 500 mm · ±0.05 mm

Supply references

ISO 2768-m · Drawing-based · Material certificate on request

Typical applications

  • Non-standard spares
  • Modifications to existing equipment
  • Urgent replacement parts
NOTEWe ask for a PDF or DXF drawing with material and tolerances. Critical parts requiring heat treatment or NDT are priced separately.

Sample part numbers

5 lines shown

Part numberDescriptionMaterialSizeTypical use
GC-MCH-FLG-SPCSpecial flange to drawingA182 F316LDN80 · PN16 · ±0.1 mmEquipment connections outside standard dimensions
GC-MCH-SPC-RNGSpacer ringDuplex F51DN100 · 6 mmSetting gaps in equipment joints
GC-MCH-WPR-PLTWear plate400 HB500 × 300 × 12 mmImpact protection in chutes and hoppers
GC-MCH-BRK-SKDEquipment bracketS355 · مجلفنحسب الرسمMounting pumps and valves on structures
GC-MCH-REV-ENGReverse engineering from sampleحسب القطعةحتى 600 mmObsolete or unnumbered parts

The numbers above show our coding format and are not confirmed stock. Availability and lead time are confirmed in the quotation.

Scroll the table sideways to see all columns.

Before you send

Six fields that make the first quote accurate.

If you do not have all of them, send what you have. We review the gaps and ask before pricing instead of assuming.

Send the material list
  • 01

    Standard and grade (e.g. A106 Gr.B)

  • 02

    Size and schedule or wall thickness

  • 03

    Pressure class and facing type

  • 04

    Quantity and unit of measure

  • 05

    Required tests and documents

  • 06

    Required delivery date